9 Ways on how to make headphones louder

In a world filled with the rhythms and melodies that fuel our everyday lives, sometimes we find ourselves yearning for more. If you’re someone who craves that extra audio punch, if you’ve ever wondered how to take your listening experience to the next level, then read on, because we’re about to unveil the secrets on how to make headphones louder. and more powerful than ever.

There are several ways to make your headphones louder. You can adjust your device’s volume settings, use a music app with its own volume controls, or install a volume booster app. You can also try adjusting the equalizer settings to boost certain frequencies or use foam ear tips to create a tighter seal and reduce ambient noise.

If you’re still not satisfied with the volume, you may want to consider using an external headphone amplifier. This will provide the most significant boost to volume, but it’s important to choose an amp that is compatible with your headphones.

Audio Contents show

What methods can I use to make my headphones louder?

There are a number of methods you can use to make your headphones louder. Here are a few of the most common and effective:

Check your device’s settings. Many devices have software controls that can limit the maximum volume of your headphones. Make sure that these controls are turned off or set to a higher level.

Use a music app with a built-in equalizer. Many music apps, such as Spotify and Apple Music, have built-in equalizers that can boost the bass and treble frequencies, which can make your headphones sound louder overall.
Install a third-party equalizer app. There are a number of third-party equalizer apps available that can give you even more control over your headphone’s sound. Some of these apps also have volume-boosting features that can make your headphones significantly louder.
Use an external amplifier. If you have a high-impedance pair of headphones, you may need to use an external amplifier to get them to their full potential. An amplifier will provide more power to your headphones, which can make them louder and improve the overall sound quality.

Clean your headphones. Dirt and earwax can build up on your headphones’ drivers and earcups, which can muffle the sound. Cleaning your headphones regularly can help improve their sound quality and make them louder.
Upgrade your headphones. If you’ve tried all of the other methods and you’re still not satisfied with the volume of your headphones, you may need to upgrade to a new pair. Headphones with higher sensitivity and lower impedance will generally be louder than headphones with lower sensitivity and higher impedance.

Here are some additional tips for making your headphones louder:

Make sure that your headphones are properly fitted to your ears. A good seal will help to block out external noise and make your headphones sound louder.
Use a noise-canceling feature if your headphones have one. This will help to reduce background noise and make your music sound louder.
Listen to your music at a moderate volume. Listening to music at a high volume for extended periods of time can damage your hearing.

Are there safe ways to increase headphone volume?

There are a number of safe ways to increase headphone volume. Here are a few tips:

Adjust the volume settings on your device. Most devices have volume controls that allow you to adjust the volume of your headphones. Make sure that these controls are set to a level that is comfortable for you.
Use an equalizer to boost the bass and treble frequencies. This can make your headphones sound louder overall without damaging your hearing.

Consider using an external amplifier if you have high-impedance headphones. An amplifier will provide more power to your headphones, which can make them louder and improve the overall sound quality.
Clean your headphones regularly to remove dirt and earwax buildup. This can improve the sound quality and make your headphones louder.
Upgrade your headphones to a higher-quality pair if you are not satisfied with the volume of your current headphones. Headphones with higher sensitivity and lower impedance will generally be louder than headphones with lower sensitivity and higher impedance.

9 Ways on how to make headphones louder

The major 9 ways on how to make your headphones louder:

Check the volume settings on your device. Make sure that the volume is turned up all the way on your device, and that any volume limiting features are turned off.
Adjust the volume on your headphones. Many headphones have their own volume controls, so make sure that those are turned up as well.

Adjust the settings in your headphones’ native app. Some headphones have their own apps that allow you to adjust various settings, such as volume and equalization. Check to see if your headphones have an app, and if so, use it to boost the volume.
Use a louder music app. Some music apps, such as Poweramp and Equalizer FX, have built-in volume boosters. Try using a different music app to see if that makes a difference.
Use a louder equalizer setting. An equalizer allows you to adjust the different frequency bands of your audio. Boosting the treble and bass bands can make your headphones sound louder.

Use an external amplifier. An external amplifier can boost the signal going to your headphones, making them louder. However, be careful not to overuse an amplifier, as this can damage your headphones.
Clean your headphones. Dirt and earwax can build up on your headphones and block the sound. Cleaning your headphones regularly can help improve the sound quality and volume.
Get new ear tips. If you are using in-ear headphones, try getting new ear tips. A good fit will help to seal out noise and improve the volume.

Upgrade your headphones. If you have tried all of the above and your headphones are still too quiet, it may be time to upgrade to a new pair of headphones. Look for headphones with a high sensitivity rating, as this means that they will be able to produce louder sound.

Important note: It is important to be careful when listening to loud music, as it can damage your hearing. Avoid listening to music at maximum volume for extended periods of time.

Can I adjust headphone volume on my device or in the headphones themselves?

Yes, you can adjust headphone volume on your device or in the headphones themselves.

On your device:

Operating system: Most operating systems, such as Windows, macOS, and Android, have volume controls that allow you to adjust the volume of your headphones. These controls are typically located in the sound settings.
Media player: Many media players, such as Spotify, Apple Music, and VLC Media Player, also have volume controls that allow you to adjust the volume of your headphones. These controls are typically located in the playback controls.

On your headphones:

Volume controls: Many headphones have physical volume controls, such as buttons or wheels, that allow you to adjust the volume. These controls are typically located on the earcups or on the inline remote.
Software controls: Some headphones also have software controls that allow you to adjust the volume. These controls are typically accessed through a companion app or through a website.

In general, it is recommended to adjust the volume on your device rather than on your headphones. This is because adjusting the volume on your device will affect the volume of all audio output, including your headphones, your speakers, and any other audio devices that are connected to your device. Adjusting the volume on your headphones will only affect the volume of your headphones.

Here are some additional things to keep in mind when adjusting headphone volume:

Different headphones have different impedance. The impedance of a headphone is a measure of its electrical resistance. Headphones with higher impedance require more power to drive, so you may need to turn up the volume on your device higher with high-impedance headphones than with low-impedance headphones.

Different devices have different audio outputs. The audio output of a device is a measure of how much power it can provide to headphones. Devices with higher audio outputs can drive headphones with higher impedance, so you may be able to get a louder volume with high-impedance headphones on a device with a high audio output than on a device with a low audio output.
It is important to listen to music at a safe volume. Listening to music at a high volume for extended periods of time can damage your hearing. The safe listening level for headphones is 85 decibels (dB) or lower.

What are the risks of making headphones too loud?

Regularly listening to music or other audio at excessive volumes through headphones can lead to several health risks, including:

Noise-induced hearing loss (NIHL): This is the most common and significant risk associated with excessive headphone use. NIHL is a permanent type of hearing loss caused by damage to the hair cells in the inner ear. Once these hair cells are damaged, they cannot regenerate, leading to irreversible hearing loss.
Tinnitus: Tinnitus is the perception of ringing, buzzing, or other noises in the ears. It can be a temporary or permanent condition, and it is often associated with NIHL. Tinnitus can make it difficult to concentrate, sleep, and enjoy everyday activities.
Hyperacusis: Hyperacusis is an increased sensitivity to sounds. People with hyperacusis find sounds that are normally tolerable to be uncomfortably loud. Hyperacusis can make it difficult to be in noisy environments and can lead to social isolation.

Eardrum damage: In rare cases, excessive headphone use can lead to perforation or rupture of the eardrum. This is a serious condition that requires medical attention.
Psychological effects: Listening to music at high volumes can also have psychological effects, such as anxiety, irritability, and difficulty concentrating.

To minimize the risks associated with excessive headphone use, follow these guidelines:

Limit the volume: Keep the volume at a comfortable level, and avoid listening to music at high volumes for extended periods.
Take breaks: Take regular breaks from listening to headphones to give your ears a rest.

Use noise-canceling headphones: Noise-canceling headphones can help reduce external noise, allowing you to listen to music at a lower volume.
Get regular hearing checkups: Have your hearing checked regularly by an audiologist to detect any signs of hearing loss early on.

By following these guidelines, you can enjoy your music safely and protect your hearing health.

Are there apps or software to boost headphone volume?

There are apps and software available that can boost headphone volume on your devices, such as smartphones, tablets, and computers. These apps and software can be useful if you find that the default volume settings are not loud enough for your needs. However, it’s essential to use them with caution, as excessively high volumes can potentially damage your hearing.

Here are a few options:

Equalizer Apps: Many equalizer apps for smartphones allow you to boost the volume. They often come with pre-configured presets or customizable settings to adjust the audio output to your liking. Examples include apps like “Equalizer FX” or “Music Volume EQ.”

Volume Booster Apps: There are apps specifically designed to boost volume levels beyond the device’s default settings. Examples include “Volume Booster GOODEV” for Android and “Sound Booster” for iOS.
Desktop Software: If you’re using a computer, you can explore audio enhancement software. For Windows, you can try using third-party equalizer software like “Equalizer APO” or “Voicemeeter.” On macOS, you can use the built-in “Audio MIDI Setup” or third-party apps like “Boom 3D” or “eqMac.”
Sound Amplification Features: Some smartphones and devices have built-in sound amplification features that can boost volume, especially for calls or specific apps. Check your device’s settings or accessibility features for such options.

Custom ROMs and Rooting (Android): Some Android users with rooted devices may have access to custom ROMs and mods that allow for more extensive audio customization, including volume boosting. However, this process may void warranties and have associated risks, so it’s not recommended for inexperienced users.

Exercise caution when using volume-boosting apps and software, as listening at excessively high volumes for extended periods can lead to hearing damage. Be aware of your hearing health and use these tools responsibly. If you experience discomfort or decreased hearing sensitivity while using volume-boosting tools, it’s advisable to reduce the volume to a safer level.

How do I maximize headphone volume without distortion?

Maximizing headphone volume without distortion requires a balance between increasing the audio signal and maintaining the integrity of the sound quality. Here are some effective methods to achieve louder volume without compromising sound quality:

Utilize Equalizer Settings: Adjusting the equalizer settings can significantly impact the overall sound profile and perceived loudness. Boosting the frequencies in the bass and treble range can enhance the clarity and punchiness of your audio, making it sound louder without introducing distortion.
Employ Audio Enhancement Software: Specialized audio enhancement software can provide additional controls for optimizing headphone performance. These tools often include features like dynamic range compression, which can balance the volume levels across the entire audio spectrum, resulting in a louder and more consistent sound.
Upgrade Headphone Quality: Investing in high-quality headphones with higher sensitivity and lower impedance can naturally enhance the volume output. Higher sensitivity headphones require less power to deliver a louder sound, while lower impedance headphones allow for more efficient power transfer from your device.

Consider External Amplification: For high-impedance headphones, an external amplifier can provide the necessary power to drive the drivers effectively, resulting in a significant boost in volume without distortion.
Optimize Device Settings: Ensure that your device’s audio settings are configured appropriately for your headphones. Disable any audio enhancements or volume limitations that might be restricting the output.
Clean Headphone Drivers: Regular cleaning of headphone drivers can remove dirt and earwax buildup, which can muffle the sound and reduce perceived loudness. Use a soft cloth or cotton swab dampened with alcohol to gently clean the drivers.

Proper Fit and Seal: Ensure that your headphones fit snugly and create a proper seal around your ears. A good seal prevents sound leakage and enhances the overall listening experience, making the audio sound louder.
Choose the Right Audio Source: Different audio sources, such as streaming services or local music files, may have varying levels of dynamic range. Opt for high-quality audio sources with a wider dynamic range for a richer and more impactful sound.
Adjust Listening Environment: Reduce background noise in your listening environment to minimize distractions and allow you to appreciate the sound quality at a comfortable volume.

Prioritize Hearing Health: While maximizing volume is appealing, it’s crucial to prioritize your hearing health. Avoid listening at excessively high volumes for extended periods, as this can lead to irreversible hearing damage.

Remember, maximizing headphone volume without distortion is a delicate balance. By utilizing these methods and exercising caution, you can enjoy a more immersive and enjoyable listening experience without compromising your hearing health.

Is it safe to use headphone amplifiers for increased volume?

Yes, it is generally safe to use headphone amplifiers for increased volume when done responsibly and with caution. Headphone amplifiers are designed to provide more power to your headphones, which can make them louder. However, it is important to use the amplifier at a safe volume level to avoid damaging your hearing.

Here are some tips for using headphone amplifiers safely:

Start with a low volume level and gradually increase it until you find a comfortable level.
Take breaks from listening to music at a high volume for extended periods of time.

Be aware of the signs of hearing loss, such as ringing in your ears or difficulty hearing conversations.
If you experience any hearing problems, stop using the amplifier and see a doctor immediately.

Here are some additional things to keep in mind when using headphone amplifiers:

Not all headphones are compatible with all amplifiers. Make sure that the amplifier you choose is compatible with your headphones.
Some amplifiers can distort the sound if used at high volume levels. If you notice any distortion, reduce the volume level.
Using an amplifier with high-impedance headphones can damage the headphones. If you have high-impedance headphones, you may want to consider using a lower-impedance pair of headphones with the amplifier.

Can different headphone models be adjusted differently for volume?

Different headphone models can be adjusted differently for volume. This is because different headphone models have different impedances and sensitivities.

Impedance is a measure of how much resistance a headphone has to the flow of electrical current. Headphones with higher impedances require more power to drive, so you may need to turn up the volume on your device higher with high-impedance headphones than with low-impedance headphones.

Sensitivity is a measure of how loud a headphone is for a given amount of power. Headphones with higher sensitivities will be louder than headphones with lower sensitivities.

In general, headphones with higher impedances and lower sensitivities will require more power to drive and will be less loud than headphones with lower impedances and higher sensitivities. However, there are also many other factors that can affect the volume of a headphone, such as the size of the drivers, the type of earcups, and the fit of the headphone.

Here are some general tips for adjusting the volume of your headphones:

If your headphones have physical volume controls, use them to adjust the volume.
If your headphones do not have physical volume controls, you can adjust the volume on your device.
If you are using an external amplifier, you can adjust the volume on the amplifier.

If you are still not satisfied with the volume of your headphones, you may need to upgrade to a new pair of headphones.

Here are some additional things to keep in mind when adjusting headphone volume:

Different devices have different audio outputs. The audio output of a device is a measure of how much power it can provide to headphones. Devices with higher audio outputs can drive headphones with higher impedances, so you may be able to get a louder volume with high-impedance headphones on a device with a high audio output than on a device with a low audio output.

It is important to listen to music at a safe volume. Listening to music at a high volume for extended periods of time can damage your hearing. The safe listening level for headphones is 85 decibels (dB) or lower.

What is the ideal headphone volume level for clear audio?

The ideal headphone volume level for clear audio is 80-85 decibels (dB). This is the safe level recommended by the World Health Organization (WHO) to prevent hearing damage from prolonged exposure to loud sounds. At this level, you can enjoy your music without experiencing distortion or muffling.

Here are some tips for adjusting your headphone volume to the ideal level:

Use the volume controls on your headphones or device.
Download a sound level meter app to measure the volume of your headphones.
Listen to your music in a quiet environment where you can focus on the sound.

Take breaks from listening to music at high volumes for extended periods of time.
Get regular hearing checkups to monitor your hearing health.

Here are some additional things to keep in mind when adjusting headphone volume:

The ideal headphone volume level may vary depending on the type of music you are listening to. For example, classical music may sound better at a lower volume than rock music.
The ideal headphone volume level may also vary depending on your personal preferences. Some people prefer to listen to music at a higher volume than others.

Are there volume restrictions on some devices or headphones?

Yes, there are volume restrictions on some devices or headphones. These restrictions are in place to protect your hearing from damage caused by loud sounds.

Device-based volume restrictions:

Mobile devices: Most smartphones and tablets have built-in software that limits the maximum volume to 85 decibels (dB). This is the safe listening level recommended by the World Health Organization (WHO) to prevent hearing damage from prolonged exposure to loud sounds.
Computers: Some computers also have built-in software that limits the maximum volume. However, this is not always the case. If you are concerned about the volume of your computer’s headphones, you can check the manufacturer’s website or user manual to see if there are any software settings that can limit the volume.

Noise- and headphone-based volume restrictions:

canceling headphones: Some noise-canceling headphones have built-in software that limits the maximum volume. This is because noise-canceling headphones can make the sound seem louder than it actually is, due to the way they block out external noise.
Children’s headphones: Many children’s headphones have a built-in volume limiter that sets the maximum volume to 85 dB. This is to protect children’s hearing from damage caused by loud sounds.

In addition to these built-in volume restrictions, there are also a number of third-party apps that can limit the volume of your headphones. These apps can be useful if you want to have more control over the maximum volume of your headphones.

Volume restrictions are not a foolproof way to protect your hearing. You can still damage your hearing if you listen to music at a high volume for extended periods of time, even if the volume is limited. The best way to protect your hearing is to listen to music at a safe volume and to take breaks from listening to music for extended periods of time

How can I enhance the bass and overall sound while increasing volume?

Enhancing the bass and overall sound while increasing volume requires a combination of hardware and software adjustments. Here’s a step-by-step guide to achieve the desired audio experience:

Choose the Right Headphones: The quality of your headphones significantly impacts the overall sound quality and bass response. Opt for headphones with larger drivers, as they can produce deeper and richer bass. Consider closed-back headphones, as they tend to isolate the sound and enhance bass perception.
Utilize Equalizer Settings: Equalizers allow you to adjust the frequency balance of the audio, fine-tuning the bass and treble levels. Most smartphones, music players, and media players have built-in equalizers. Experiment with different equalizer presets or create your own custom preset to boost bass frequencies.

Employ Audio Enhancement Software: Specialized audio enhancement software can provide more granular control over your audio profile. These tools often include features like bass boost, virtual surround sound, and dynamic range compression, which can enhance overall sound quality and bass impact.
Consider External Amplification: For high-impedance headphones, an external amplifier can provide the necessary power to drive the drivers effectively, resulting in a significant boost in volume and bass response. However, ensure that the amplifier is compatible with your headphones and that you don’t overdrive the headphones to avoid distortion.
Optimize Device Settings: Check your device’s audio settings to ensure they are not limiting the volume or applying any unwanted audio enhancements. Disable any audio enhancements or volume limitations that might be restricting the output.

Choose High-Quality Audio Sources: The quality of your audio source can significantly impact the overall sound quality. Opt for high-quality audio files, such as lossless formats like FLAC or WAV, instead of compressed formats like MP3 or AAC.
Proper Fit and Seal: Ensure that your headphones fit snugly and create a proper seal around your ears. A good seal prevents sound leakage and enhances the overall listening experience, making the bass sound more impactful.
Adjust Listening Environment: Reduce background noise in your listening environment to minimize distractions and allow you to appreciate the sound quality at a comfortable volume.

Balance Bass and Clarity: While boosting bass can enhance the listening experience, it’s crucial to maintain a balance with clarity. Overexaggerating the bass can make the sound muddy or distorted. Adjust the bass and treble levels to achieve a balanced sound profile that suits your preferences.
Prioritize Hearing Health: While enjoying enhanced bass and overall sound, prioritize your hearing health. Avoid listening at excessively high volumes for extended periods, as this can lead to irreversible hearing damage. Take breaks from listening to music and monitor your hearing health regularly.

Are noise-canceling headphones adjustable for increased volume?

Yes, noise-canceling headphones are adjustable for increased volume. The noise cancellation feature is independent of the volume control, so you can adjust the volume to your liking without affecting the noise cancellation.

Many noise-canceling headphones have physical volume controls on the earcups, or you can adjust the volume on your device. Some noise-canceling headphones also have built-in software that allows you to adjust the volume.

In addition to adjusting the volume, you can also adjust the level of noise cancellation. This can be helpful if you want to reduce background noise without blocking out all sound.

Here are some tips for using noise-canceling headphones for increased volume:

Start with a low volume level and gradually increase it until you find a comfortable level.
Be aware of your surroundings, and make sure that you can hear traffic or other important sounds.
Take breaks from listening to music at high volumes for extended periods of time.

Can I customize volume settings for different music genres?

Customizing volume settings for different music genres can be a bit challenging, as most music players and devices typically allow you to adjust the overall volume, but not specifically for different genres. However, you can achieve a similar effect by considering the following options:

Equalizer Settings: Many music players and apps offer equalizer settings that allow you to adjust the balance of various frequency bands. You can create custom equalizer presets for different genres to emphasize or de-emphasize specific frequencies. For example, you can boost the bass for electronic or hip-hop music and reduce it for classical music.
Create Playlists: Create separate playlists for different music genres, and adjust the volume levels within the playlists. For example, you can set the volume lower for your classical music playlist and higher for your rock playlist.

Use Volume Normalization: Some music players and streaming services offer volume normalization features. This feature aims to ensure that all tracks are played at a consistent volume level, reducing the need to manually adjust the volume for different genres.
External Hardware: If you have advanced audio equipment, you may be able to set up different presets for different genres using an audio processor or receiver. This allows you to save custom settings for different genres and switch between them as needed.
Use Third-Party Apps: There are third-party apps and software available that provide more advanced audio customization options, including per-genre volume settings. These apps may require some technical expertise to set up.

Manual Adjustment: While not ideal, you can manually adjust the volume as you switch between genres. This may be the most straightforward approach if none of the above options are available to you.

Remember that the availability of these features and methods may vary depending on your music player or device. Explore the settings and options in your chosen music player or streaming service to see which of these methods are available to you.

What are the legal guidelines for headphone volume in certain regions?

The legal guidelines for headphone volume, specifically concerning maximum volume levels, vary by region and country. These regulations are often in place to protect individuals from hearing damage caused by prolonged exposure to loud music or sounds. Here are a few examples of regions with such guidelines:

European Union (EU): The EU has regulations in place regarding the maximum volume output of personal audio devices (including smartphones, portable media players, and headphones) to protect users from excessive noise exposure. The European Committee for Electrotechnical Standardization (CENELEC) standard EN 50332 sets the maximum output sound pressure level of personal music players to 85 decibels (dB) and requires a warning about safe listening practices.
France: In France, there is a law that prohibits personal audio devices from exceeding a maximum output volume of 100 decibels. Manufacturers must include a message that reminds users to avoid listening at high volumes for extended periods.
United States: The United States does not have federal regulations specifically limiting the maximum volume output of personal audio devices. However, some states and localities may have their own regulations or guidelines related to noise and hearing protection.

It’s essential to check the specific regulations and guidelines in your region, as they can change over time and vary widely.

Even in areas without specific regulations, it’s important to be mindful of your hearing health and consider practicing safe listening habits, such as using volume-limiting features on your devices and taking breaks to protect your ears from potential damage due to high-volume exposure.

Are there special headphones designed for individuals with hearing impairments?

There are headphones and assistive listening devices designed specifically for individuals with hearing impairments. These devices are often tailored to address various types and degrees of hearing loss, making audio content more accessible. Here are some examples of such headphones and devices:

Hearing Aid-Compatible Headphones: Some headphones are designed to work seamlessly with hearing aids, cochlear implants, or other hearing assistive devices. They may feature telecoils (also known as T-coils) that can connect to hearing aid systems for a more direct and clear audio experience. These headphones are often referred to as “T-coil” or “loop” headphones.
Bone Conduction Headphones: Bone conduction headphones work by sending sound vibrations through the bones of the skull directly to the inner ear, bypassing the outer and middle ears. This technology can be beneficial for individuals with certain types of hearing loss, as it allows them to perceive sound even if they have issues with the ear canal or middle ear.
Wireless TV Listening Systems: These systems include wireless headphones and transmitters that connect to your TV or audio source. They are particularly useful for people who have difficulty hearing TV dialogues. The audio signal is transmitted wirelessly to the headphones, allowing the user to adjust the volume to their comfort level without affecting others in the room.

Assistive Listening Devices: There are a variety of assistive listening devices available, such as personal amplifiers and FM systems. These devices can help individuals with hearing impairments in various listening situations, including lectures, meetings, and group conversations.
Noise-Canceling Headphones: Noise-canceling headphones are not designed exclusively for individuals with hearing impairments, but they can be useful for some people with hearing loss. By reducing background noise, they can make it easier to hear and understand speech or audio content.
Smartphone Apps and Accessories: Many smartphone apps and accessories are designed to help individuals with hearing impairments. These apps can provide amplified sound, closed captions, or even transcribe spoken words into text.

When seeking headphones or devices for hearing-impaired individuals, it’s essential to consider the specific needs and type of hearing loss. Consulting with an audiologist or hearing healthcare professional is advisable to determine the most appropriate solution for the individual’s unique situation.

Conclusion

How to make headphones louder Enhancing headphone volume can be achieved through a combination of hardware and software adjustments. Opt for headphones with higher sensitivity and lower impedance, as they require less power to produce louder sound. Utilize equalizer settings to boost bass and treble frequencies, creating a more impactful listening experience.

Consider using external amplifiers with high-impedance headphones to provide additional power for increased volume without distortion. Adjust device settings to ensure no volume limitations are restricting the output. Prioritize hearing health by listening at a safe volume and taking breaks from prolonged exposure to loud sounds.