How to reset Airpods | Ultimate guide

If you find yourself encountering connectivity issues or unusual behavior with your AirPods, knowing how to reset AirPods can be a handy solution to troubleshoot and restore their optimal functionality.

To reset your AirPods, first place them in their charging case and close the lid for at least 30 seconds. Once this time has elapsed, open the lid and hold down the setup button on the back of the case for approximately 15 seconds.

The status light on the front of the case should flash amber and then white, indicating that your AirPods have been successfully reset. After resetting your AirPods, you will need to reconnect them to your iPhone or iPad by following the standard pairing process.

Audio Contents show

How do you reset AirPods to factory settings?

Resetting your AirPods to factory settings will erase all of your saved settings and pairings, and return them to their original state. This can be helpful if you are having problems with your AirPods, or if you want to sell or give them away.

Here are the steps on how to reset AirPods to factory settings:

Put your AirPods in their charging case and close the lid. Wait for 30 seconds.
Open the lid of the charging case.
Go to Settings > Bluetooth on your iPhone or iPad.

Find your AirPods in the list of Bluetooth devices and tap on them.
Tap on the “Forget This Device” button.
Close the lid of the charging case for a few seconds, and then open it again.

Press and hold the setup button on the back of the charging case for about 15 seconds, until the status light flashes amber and then white.

Your AirPods are now reset to factory settings. You will need to pair them with your iPhone or iPad again to use them.

Here are some additional things to keep in mind:

Resetting your AirPods to factory settings will also erase any firmware updates that you have installed.
If you are having problems with your AirPods, you may want to try restarting them before resetting them to factory settings. To restart your AirPods, put them in their charging case and close the lid for 15 seconds. Then, open the lid and press and hold the setup button on the back of the case for about 5 seconds, until the status light flashes white.
If you are still having problems with your AirPods after restarting them, you may need to contact Apple Support for further assistance.

Can you guide me through the steps to reset my AirPods?

Sure, I can guide you through the steps to reset your AirPods:

Step 1: Prepare your AirPods and charging case

Make sure your AirPods are fully charged or placed inside the charging case.

Close the lid of the charging case and wait for 30 seconds.

Step 2: Unpair your AirPods from your device

On your iPhone or iPad, go to Settings > Bluetooth.

Locate your AirPods in the list of Bluetooth devices.
Tap on the More Info button next to your AirPods.
Select Forget This Device.

Confirm the action by tapping Forget Device again.

Step 3: Reset your AirPods to factory settings

With the charging case lid open, place your AirPods inside.

Locate the setup button on the back of the charging case.
Press and hold the setup button for approximately 15 seconds.
The status light on the charging case will flash amber, then white, indicating a successful reset.

Step 4: Reconnect your AirPods to your device

With the charging case lid open, keep your AirPods in close proximity to your iPhone or iPad.
Your AirPods should automatically reconnect to your device. If not, manually connect them by going to Settings > Bluetooth, tapping on your AirPods, and selecting Connect.

Once your AirPods are reset, they will be restored to their factory settings and will need to be reconnected to your device. Follow the above steps to seamlessly reconnect your AirPods.

What’s the process for resetting AirPods Pro?

The process for resetting AirPods Pro is the same as resetting any other generation of AirPods. Here are the steps:

Put your AirPods Pro in their charging case and close the lid. Wait 30 seconds.

Open the lid of your charging case.
Go to Settings > Bluetooth on your iPhone or iPad.
Tap the More Info button next to your AirPods Pro.

Tap Forget This Device, then tap Forget Device again to confirm.
Put your AirPods Pro back in their charging case and keep the lid open.
Press and hold the setup button on the back of the case for about 15 seconds, until the status light on the front of the case flashes amber, then white.

Your AirPods Pro are now reset. To reconnect your AirPods Pro, open the lid of the charging case and place your AirPods Pro close to your iPhone or iPad. Your AirPods Pro will automatically reconnect to your device.

Here are some additional methods for resetting AirPods Pro:

If you are unable to reset your AirPods Pro using the steps above, you may need to contact Apple Support for assistance.

Resetting your AirPods Pro will erase all of your settings, including your name, pairing information, and any custom settings you have made.
After resetting your AirPods Pro, you will need to reconnect them to your iPhone or iPad.

Is there a quick way to reset AirPods without using a device?

There is no quick way to reset AirPods without using a device. The only way to reset AirPods is to use the steps outlined in the previous response. These steps require using an iPhone or iPad to unpair the AirPods and then hold the setup button on the back of the charging case for 15 seconds.

The reason why AirPods cannot be reset without a device is because they store their settings on the device they are paired with. When you reset AirPods, you are essentially erasing these settings from the device. Therefore, a device is required to perform the reset process.

Can you reset AirPods if they’re not connecting properly?

Resetting your AirPods can often resolve connectivity issues. By resetting them, you’re essentially wiping out any existing pairing information and software glitches that might be causing the connection problems.

Once reset, your AirPods will be in a fresh state and ready to be paired with your device again.

Here’s how to reset your AirPods if they’re not connecting properly:

Place your AirPods in their charging case and close the lid. Wait for 30 seconds.

Open the lid of the charging case. Your AirPods should automatically connect to your iPhone or iPad. If they don’t, proceed to the next step.
Go to Settings > Bluetooth on your iPhone or iPad.
Locate your AirPods in the list of Bluetooth devices. If you see them listed, tap on the More Info button next to your AirPods.

Tap Forget This Device, then tap Forget Device again to confirm.
Close the lid of the charging case and wait 15 seconds.
Open the lid of the charging case again. Press and hold the setup button on the back of the charging case for about 15 seconds, until the status light on the front of the case flashes amber, then white.

Your AirPods are now reset. To reconnect your AirPods, open the lid of the charging case and place your AirPods close to your iPhone or iPad. Your AirPods should automatically reconnect to your device.

If you’ve followed these steps and your AirPods are still not connecting properly, you may need to contact Apple Support for further assistance.

What are the steps to perform a hard reset on AirPods?

Hard resetting your AirPods will erase all of your settings and restore them to their factory default state. This can be helpful if you are having problems with your AirPods, such as if they are not connecting properly or if they are not working properly. Here are the steps on how to hard reset your AirPods:

Put your AirPods in their charging case and close the lid.
Wait 30 seconds.
Open the lid of the charging case.

Go to Settings > Bluetooth on your iPhone or iPad.
Tap on the More Info button next to your AirPods.
Tap on Forget This Device.

Tap on Forget Device again to confirm.
Close the lid of the charging case and wait 15 seconds.
Open the lid of the charging case again.

Press and hold the setup button on the back of the charging case for about 15 seconds, until the status light on the front of the case flashes amber, then white.

Your AirPods are now hard-reset. To reconnect your AirPods, open the lid of the charging case and place your AirPods close to your iPhone or iPad. Your AirPods should automatically reconnect to your device.

Is there a difference in resetting AirPods and AirPods Pro?

There is no difference in the process of resetting AirPods and AirPods Pro. The steps are exactly the same for both models. Here’s a summary of the steps:

Place your AirPods or AirPods Pro in their charging case and close the lid. Wait for 30 seconds.
Open the lid of the charging case.
Go to Settings > Bluetooth on your iPhone or iPad.

Locate your AirPods or AirPods Pro in the list of Bluetooth devices. Tap on the More Info button next to your AirPods or AirPods Pro.
Tap Forget This Device, then tap Forget Device again to confirm.
Put your AirPods or AirPods Pro back in their charging case and keep the lid open.

Press and hold the setup button on the back of the case for about 15 seconds, until the status light on the front of the case flashes amber, then white.
Your AirPods or AirPods Pro are now reset. To reconnect your AirPods or AirPods Pro, open the lid of the charging case and place your AirPods or AirPods Pro close to your iPhone or iPad. Your AirPods or AirPods Pro should automatically reconnect to your device.

How do I clear Bluetooth pairing and reset AirPods?

To clear Bluetooth pairing and reset your AirPods, follow these steps:

Step 1: Clear Bluetooth pairing

On your iPhone or iPad, go to Settings > Bluetooth.

Locate your AirPods in the list of paired devices.
Tap on the More Info button next to your AirPods.
Select Forget This Device.

Confirm the action by tapping Forget Device again.

Step 2: Reset AirPods

With the charging case lid open, place your AirPods inside.

Locate the setup button on the back of the charging case.
Press and hold the setup button for approximately 15 seconds.
The status light on the charging case will flash amber, then white, indicating a successful reset.

Once you have completed these steps, your AirPods will be unpaired from your device and reset to their factory settings. You will need to re-pair your AirPods with your device to use them again.

Here are some additional ways for clearing Bluetooth pairing and resetting AirPods:

If you are unable to reset your AirPods using the steps above, you may need to contact Apple Support for assistance.

Resetting your AirPods will erase all of your settings, including your name, pairing information, and any custom settings you have made.
After resetting your AirPods, you will need to reconnect them to your iPhone or iPad.

Can resetting AirPods fix charging issues?

Resetting AirPods can potentially fix charging issues by eliminating minor software glitches or bugs that may be interfering with the charging process.

A reset will restore your AirPods to their factory default settings, clearing any temporary data or settings that might be causing problems. However, it is vital to note that resetting your AirPods will also erase any custom settings you have made, such as renaming them or changing the double-tap gestures.

Here are the steps on how to reset your AirPods:

Place your AirPods in their charging case and close the lid.

Wait for 30 seconds.
Open the lid of the charging case and hold down the setup button on the back of the case until the status light flashes amber, then white.
Your AirPods will be reset and ready to be paired with your device again.

If resetting your AirPods does not fix the charging issue, there may be a hardware problem with your AirPods or charging case. In this case, you may need to contact Apple Support for further assistance.

Here are some other things you can try to fix AirPods charging issues:

Make sure that the charging case is plugged into a power source and that the charging light is on.

Clean the charging contacts on the AirPods and charging case with a soft, dry cloth.
Try using a different charging cable or power source.
Update the firmware on your AirPods.

Contact Apple Support for further assistance.

What should I do if my AirPods aren’t responding after a reset?

If your AirPods aren’t responding after a reset, there are a few things you can try:

Make sure your AirPods are fully charged. Place them in the charging case and wait for at least 30 minutes.

Check that Bluetooth is enabled on your device. On an iPhone or iPad, go to Settings > Bluetooth. On a Mac, go to System Preferences > Bluetooth.
Make sure that your AirPods are in pairing mode. Open the lid of the charging case and hold down the setup button on the back of the case until the status light flashes white.
Try forgetting your AirPods and re-pairing them with your device. On an iPhone or iPad, go to Settings > Bluetooth > tap the blue “i” next to your AirPods > tap “Forget This Device” > tap “Forget Device” again. On a Mac, go to System Preferences > Bluetooth > select your AirPods > click the “-” button > click “Forget” when prompted.

Clean your AirPods and charging case. Debris can build up on the charging contacts and interfere with the charging process. Use a soft, dry cloth to clean the contacts on both the AirPods and the charging case.
Update the firmware on your AirPods. Your AirPods may have a firmware update that fixes the problem. To update the firmware, connect your AirPods to your iPhone or iPad and then go to Settings > General > About > AirPods. If an update is available, you will be prompted to install it.
Contact Apple Support. If you’ve tried all of these steps and your AirPods still aren’t responding, you may need to contact Apple Support for further assistance. You can reach them online.

Are there alternative methods for resetting AirPods?

There are alternative methods for resetting AirPods.

In fact, you can reset your AirPods without touching your iPhone or iPad to your AirPods as long as your AirPods are connected to a Bluetooth device (the first time).

Here are the steps on how to reset your AirPods without an iPhone or iPad:

Turn off Bluetooth on the device that your AirPods are connected to.
If you don’t know the device that your AirPods are connected to, disable Bluetooth from another device that your AirPods might be connected to.
On your AirPods, press and hold down the setup button on the back of the charging case for about 15 seconds, until the status light flashes orange and then white.

Your AirPods will be reset and ready to be paired with your device again.

Is it possible to reset AirPods without an iPhone?

It is possible to reset AirPods without an iPhone. You can do this by following these steps:

Make sure that your AirPods are not connected to any devices.
Place your AirPods in their charging case and close the lid.
Wait for 30 seconds.

Open the lid of the charging case and hold down the setup button on the back of the case for about 15 seconds, until the status light flashes amber, then white.
Your AirPods will be reset and ready to be paired with your device again.

Here are some additional tips:

Try restarting your device.
Try resetting your AirPods again.
Make sure that your device is up to date.

Try using your AirPods with a different device.

How do I troubleshoot and reset AirPods for audio problems?

If you’re experiencing audio problems with your AirPods, there are a few things you can do to troubleshoot and fix the issue.

Check the connection

Make sure that your AirPods are properly connected to your device. You can check this by going to the Bluetooth settings on your device and making sure that your AirPods are listed as connected. If they are not connected, try re-pairing them.

Clean the AirPods

Dirt and debris can build up on the AirPods and charging case, which can interfere with the sound quality. Clean the AirPods and charging case with a soft, dry cloth.

Update the firmware

Your AirPods may have a firmware update that fixes the audio problem. To update the firmware, connect your AirPods to your iPhone or iPad and then go to Settings > General > About > AirPods. If an update is available, you will be prompted to install it.

Reset the AirPods

If the above steps do not fix the problem, you can try resetting your AirPods. This will erase all of your settings and data, so make sure to back them up first. To reset your AirPods, follow these steps:

Place your AirPods in their charging case and close the lid.
Wait for 30 seconds.

Open the lid of the charging case and hold down the setup button on the back of the case until the status light flashes amber, then white.
Your AirPods will be reset and ready to be paired with your device again.

Contact Apple Support

If you’ve tried all of these steps and your AirPods are still having audio problems, you may need to contact Apple Support for further assistance.

Here are some additional tips for troubleshooting AirPods audio problems:

Try restarting your device.
Make sure that your device is up-to-date.
Try using your AirPods with a different device.

What precautions should be taken before resetting AirPods?

Before resetting your AirPods, it is important to consider the following precautions:

Back up your data. Resetting your AirPods will erase all of your settings and data, so make sure to back them up first. You can do this by connecting your AirPods to your iPhone or iPad and then going to Settings > General > About > AirPods. Tap on the name of your AirPods and then tap on “Back Up Now.”
Update your firmware. Your AirPods may have a firmware update that fixes the problem you’re experiencing. To update the firmware, connect your AirPods to your iPhone or iPad and then go to Settings > General > About > AirPods. If an update is available, you will be prompted to install it.
Unpair your AirPods. If you’re having trouble resetting your AirPods, you can try unpairing them from your device and then pairing them again. To unpair your AirPods, go to the Bluetooth settings on your device and tap on the blue “i” next to your AirPods. Tap on “Forget This Device” and then tap on “Forget Device” again.
Make sure your AirPods are charged. Resetting your AirPods can take a few minutes, so make sure your AirPods are fully charged before you start the process.
Be patient. Resetting your AirPods may take a few minutes to complete. Do not remove your AirPods from the charging case during the reset process.
Contact Apple Support. If you’ve tried all of these steps and you’re still having trouble resetting your AirPods, you may need to contact Apple Support for further assistance.

Can a reset solve connectivity problems with AirPods?

Resetting your AirPods can often fix connectivity problems. A reset will erase all of your settings and data, so make sure to back them up first. To reset your AirPods, follow these steps:

Place your AirPods in their charging case and close the lid.
Wait for 30 seconds.
Open the lid of the charging case and hold down the setup button on the back of the case until the status light flashes amber, then white.
Your AirPods will be reset and ready to be paired with your device again.

Here are some additional tips for fixing AirPods connectivity problems:

Make sure that your AirPods are fully charged.
Make sure that your device is up to date.
Make sure that your AirPods are within range of your device.
Try restarting your device.
Try resetting your device’s network settings.
Try turning off Bluetooth on your device and then turning it back on.
Try pairing your AirPods with a different device.
Check for debris on the charging contacts.
Make sure that your software is up-to-date.

If you’ve tried all of these steps and you’re still having trouble connecting your AirPods, you may need to contact Apple Support for further assistance.

Conclusion

How to reset Airpods: Resetting your AirPods can be a helpful troubleshooting step if you are experiencing issues with them. To do this, first place your AirPods in their charging case and close the lid.

Wait for 30 seconds, and then open the lid. Next, go to Settings > Bluetooth on your iPhone or iPad and find your AirPods in the list of Bluetooth devices. Tap on them and then tap on the “Forget This Device” button. Close the lid of the charging case for a few seconds and then open it again.

Finally, press and hold the setup button on the back of the charging case for about 15 seconds, until the status light flashes amber and then white. Your AirPods are now reset to factory settings and will need to be paired with your iPhone or iPad again.