How to Reset Sonos Speaker- A Step-by-Step Guide

If you’ve ever encountered issues with your Sonos speaker, such as connectivity problems or software glitches, you’ll be relieved to know that there’s a simple solution to many of these issues: resetting your Sonos speaker. In this guide, we will walk you through the process of how to reset Sonos speaker.

First unplug the power cord from the speaker, ensuring that it is entirely powered off. Then, depending on your Sonos speaker model, you’ll need to press and hold a specific button, such as the Join button, Play/Pause button, or Mute button.

While simultaneously reconnecting the power cord. This action will set the reset process in motion, and it’s essential to continue holding the button until the speaker’s LED light begins to flash in alternating orange and white patterns, which typically takes about 10 seconds.

Once you see the LED light flashing green, you can release the button, signifying that the reset is complete, and the speaker has reverted to its factory default settings. It’s important to note that this process erases all custom settings and playlists, so make sure to back up any crucial data before proceeding with the reset.

Audio Contents show

How do I reset my Sonos speaker?

To reset your Sonos speaker, you can follow these general steps. Please note that the exact process may vary slightly depending on the Sonos model you have, so it’s a good idea to consult the user manual for your specific speaker if you have any doubts:

Unplug the Speaker: First, unplug the power cord from your Sonos speaker and leave it disconnected for about 10 seconds.
Factory Reset Button (if available): Some Sonos speakers have a physical factory reset button. You may need to press and hold this button. Refer to your speaker’s manual for the location of the reset button and specific instructions.
Reset via Sonos App (for newer models): If your speaker is a newer model or integrates with the Sonos S2 app, you can reset it using the app:
- Open the Sonos app on your mobile device.
- Tap on the “Settings” (gear icon) in the bottom right corner.
- Select “System.”
- Choose the room where your speaker is located.
- Scroll down and select “Remove this Sonos product.”
- Follow the on-screen instructions to reset the speaker.

Reconnect the Speaker: After performing the reset, plug the speaker back in and wait for it to power up. It may take a few minutes to complete the reset process and come back online.
Set up the Speaker Again: Once the speaker has reset and is powered on, you’ll need to set it up again using the Sonos app or your Sonos account. This involves adding the speaker to your Sonos system, connecting it to your Wi-Fi network, and configuring its settings.

Remember that resetting your Sonos speaker will erase all existing settings and data associated with that speaker, so you’ll need to set it up from scratch.

What’s the process to reset a Sonos speaker to factory settings?

To reset a Sonos speaker to factory settings, follow these steps:

Identify Your Speaker: First, make sure you identify the specific Sonos speaker you want to reset. Each Sonos model may have slightly different instructions, so it’s important to know which model you are dealing with.
Unplug the Speaker: Power off the Sonos speaker by unplugging it from the electrical outlet or, if it’s a portable model, by removing the battery. Ensure the speaker is completely powered down.

Press and Hold the Connect Button: On some Sonos models, there is a physical Connect button. For other models, you may need to use a combination of buttons. Press and hold the Connect button or the required combination of buttons. You may need to refer to the user manual or the Sonos website to find the specific button combination for your model.
Power On the Speaker: While continuing to hold the Connect button, plug the speaker back in or insert the battery if it’s a portable speaker. Keep holding the button until you see a light flash or hear a specific sound that indicates the reset process has begun. This usually takes about 5 to 10 seconds.
Release the Button: After you see the reset confirmation (the flashing light or other indicator), release the Connect button.

Complete the Reset: The speaker will go through the factory reset process, erasing all settings and data. It will then power off. When you power it back on, it should be restored to its factory settings.

Please note that resetting your Sonos speaker will erase all your configured settings, including your Wi-Fi network information, room configurations, and any music service accounts. You will need to set up the speaker again as if it were a new device.

Can I reset my Sonos speaker without the app?

You can reset your Sonos speaker without using the Sonos app. To reset a Sonos speaker, you can follow these general steps:

Unplug the power cord from the back of the Sonos speaker.
Leave the speaker unplugged for at least 10 seconds.

Plug the power cord back into the speaker.
Wait for the speaker to power up and complete the reset process. This may take a minute or two.

This will perform a basic reset of the speaker, which should clear any custom settings and return it to its default configuration. Keep in mind that this process may vary slightly depending on the specific Sonos model you have, so you may want to consult the user manual for your particular speaker if you encounter any issues.

Is there a specific button combination to reset a Sonos speaker?

There is a specific button combination to reset a Sonos speaker. The specific button combination varies depending on the model of Sonos speaker you have.

For most Sonos speakers:

Unplug the power cord from the speaker.

Press and hold the Join button (or Play/Pause button on some models) while reconnecting the power cord.
Continue holding the button until the speaker’s light flashes orange and white.
Once the light flashes green, the speaker has been reset.

For the Sonos Roam and Roam SL:

Press and hold the power button for 5 seconds to turn it off.
While holding the Play/Pause button, press and release the power button.

Continue holding the Play/Pause button until the light on the speaker flashes orange and white.
Once the light flashes green, the speaker has been reset.

Once your Sonos speaker has been reset, you will need to set it up again. To do this, open the Sonos app and follow the on-screen instructions.

What’s the difference between a soft and hard reset for a Sonos speaker?

A soft reset, also known as a reboot, is a temporary solution to minor problems with your Sonos speaker. It doesn’t erase any of your settings or data. To soft reset your Sonos speaker, simply unplug it from the power outlet for 10 seconds and then plug it back in.

A hard reset, also known as a factory reset, is a more permanent solution to more serious problems with your Sonos speaker. It will erase all of your settings and data, including your Wi-Fi connection and any custom presets. To hard reset your Sonos speaker, follow the specific instructions for your model.

Here is a table that summarizes the differences between a soft reset and a hard reset for a Sonos speaker:

Characteristic	Soft reset	Hard reset
Purpose	To temporarily resolve minor problems	To permanently resolve more serious problems
Effect on settings and data	Does not erase any settings or data	Erases all settings and data

When to perform a soft reset:

Your Sonos speaker is unresponsive.
Your Sonos speaker is not playing audio properly.

Your Sonos speaker is not connecting to your Wi-Fi network.

When to perform a hard reset:

You are having persistent problems with your Sonos speaker that cannot be resolved with a soft reset.

You are selling or giving away your Sonos speaker and want to erase all of your personal data.

Can I reset my Sonos speaker remotely?

Unfortunately, there is no way to reset your Sonos speaker remotely.

To reset a Sonos speaker, you need to physically press the buttons on the speaker itself. This is because a reset erases all of your Sonos settings, including your network settings. If you were able to reset your Sonos speaker remotely, someone could potentially reset your speaker without your permission, which could lock you out of your own Sonos system.

If you need to reset your Sonos speaker but you are not home, you can ask a friend or family member to reset it for you. Alternatively, you can contact Sonos support and they may be able to help you reset your speaker remotely.

How to reset a Sonos Play:1 speaker?

To reset a Sonos Play:1 speaker, follow these steps:

Unplug the Sonos Play:1 speaker from the power outlet.
Press and hold the Play/Pause button and the Volume Up button on the speaker.
While still holding the buttons, plug the Sonos Play:1 speaker back into the power outlet.

Continue holding the buttons until the LED light on the speaker starts flashing orange and white.
Once the LED light starts flashing orange and white, release the buttons.
The Sonos Play:1 speaker will reset and the LED light will turn green.

The reset process takes about 2 minutes. Once the reset is complete, you can set up the Sonos Play:1 speaker again using the Sonos app.

How do I reset a Sonos Play:5 speaker?

To reset a Sonos Play:5 speaker, follow these steps:

Unplug the power cord from the speaker.

Press and hold the Join button (or the Play/Pause button, if your speaker doesn’t have a Join button) while reconnecting the power cord.
Continue holding the button until the speaker’s light flashes orange and white.
Once the light flashes green, the reset is complete.

Note: Resetting your Sonos Play:5 speaker will erase all of your Sonos settings, including your paired devices, playlists, and saved music.

What are the steps to reset a Sonos Beam soundbar?

Resetting a Sonos Beam soundbar is a straightforward process. It can be done using the physical buttons on the device. Here are the steps to reset a Sonos Beam soundbar:

Unplug the Sonos Beam: First, disconnect the Sonos Beam from its power source by unplugging the power cable.
Wait for 30 seconds: Give it a little time to completely power down.
Press and hold the Join and Volume Down buttons: On the Sonos Beam, press and hold the “Join” button (the button with a WiFi icon) and the “Volume Down” button simultaneously. These buttons are located on the top of the soundbar.

Keep holding the buttons: Continue holding both buttons for about 10-15 seconds.
Observe the LED light: While holding the buttons, the LED light on the Sonos Beam will flash amber. Keep holding the buttons until you see this amber flashing light.
Release the buttons: Once you see the amber light, release both the “Join” and “Volume Down” buttons.

Reconnect the power: Plug the power cable back into the Sonos Beam.
Wait for the reset process to complete: The Sonos Beam will reboot and go through the reset process. This may take a minute or two.
Set up your Sonos Beam again: After the Sonos Beam has been reset, you will need to set it up again using the Sonos app on your mobile device.

How to perform a factory reset on a Sonos Playbar?

Performing a factory reset on a Sonos Playbar is a bit different from the process for the Sonos Beam. Here are the steps to reset a Sonos Playbar to its factory settings:

Unplug the Sonos Playbar: Disconnect the Sonos Playbar from its power source by unplugging the power cable.
Find the reset button: On the back of the Sonos Playbar, locate the reset button. It’s a small button labeled “Connect” or “Reset” and may be recessed to prevent accidental presses.

Press and hold the reset button: Use a paperclip or a similar tool to press and hold the reset button. Keep holding it down.
Reconnect the power: While still holding the reset button, plug the power cable back into the Sonos Playbar.
Continue holding the reset button: After a few seconds, you will see the LED light on the Sonos Playbar begin to flash white. Keep holding the reset button until it flashes amber, which should take about 5-10 seconds.

Release the reset button: Once the LED light starts flashing amber, release the reset button.
Wait for the reset process to complete: The Sonos Playbar will reboot and go through the reset process. This may take a minute or two.
Set up your Sonos Playbar again: After the reset is complete, you will need to set up the Sonos Playbar from scratch using the Sonos app on your mobile device.

Your Sonos Playbar should now be reset to its factory settings, and you can configure it as if it were a new device. Please note that a factory reset will erase all your previous settings and configurations, so you’ll need to reconfigure it as if it were a new device.

Can I reset a Sonos Move speaker with voice commands?

You cannot reset a Sonos Move speaker with voice commands. Sonos does not currently support voice commands for resetting speakers. To reset a Sonos Move speaker, you must use the physical buttons on the speaker.

Here are the steps to reset a Sonos Move speaker:

Take the Move off its charging base.
Press and hold the power button on the back for at least 5 seconds to turn it off.
While holding the Join button, press and release the power button once.

Hold the Join button until the light on top of the speaker starts flashing in orange and white.
Continue holding the Join button until the light on top of the speaker flashes green.
Release the Join button.

The Sonos Move speaker is now reset. You can set it up again by adding it to your Sonos system using the Sonos app.

How to reset a Sonos Roam portable speaker?

To reset a Sonos Roam portable speaker to its factory default settings, follow these steps:

Power off the speaker. Press and hold the power button on the back of the speaker for 5 seconds until you hear a chime and the status LED on the front turns off.
Hold the play/pause button and press the power button. While holding the play/pause button, press and release the power button on the back of the speaker. Continue holding the play/pause button.
Wait for the status LED to flash orange and white. This will take about 5 seconds.

Release the play/pause button. The status LED will flash green when the reset process is complete.

Once the reset process is complete, your Sonos Roam will be ready to be set up again.

What’s the process to reset a Sonos One or One SL speaker?

To reset a Sonos One or One SL speaker to its factory default settings, follow these steps:

Unplug the speaker’s power cord.
Press and hold the Connect button on the back of the speaker. The Connect button is the button with the two arrows pointing towards each other.
While holding the Connect button, plug the speaker’s power cord back in. Continue holding the Connect button until the status light on the front of the speaker starts flashing orange and white.

Release the Connect button. The status light will flash green when the reset process is complete.

Once the reset process is complete, your Sonos One or One SL speaker will be ready to be set up again.

Note: Factory resetting your Sonos One or One SL speaker will disassociate it from your Sonos account, unpair it from any paired Bluetooth devices, and delete all of your settings. If you are planning to sell or give away your speaker, it is a good idea to factory reset it first.

Are there any precautions to take before resetting a Sonos speaker?

There are a few precautions you should take before resetting a Sonos speaker:

Make sure you are resetting the correct speaker. If you have multiple Sonos speakers, it is easy to accidentally reset the wrong one. Double-check to make sure you are resetting the speaker that you want to reset.
Back up your Sonos system. Resetting a Sonos speaker will delete all of your settings and saved music. If you have a lot of custom settings, it is a good idea to back up your system before you reset a speaker. You can back up your Sonos system using the Sonos app.

Unplug the speaker from the power outlet. It is important to unplug the speaker from the power outlet before you reset it. This will help to prevent any damage to the speaker.
Be aware of the consequences of resetting a speaker. Resetting a speaker will disassociate it from your Sonos account and unpair it from any paired Bluetooth devices. You will need to set up the speaker again after you reset it.

If you are planning to sell or give away your Sonos speaker, it is a good idea to factory reset it first. This will erase all of your personal data from the speaker.

How to troubleshoot and reset a Sonos speaker with connectivity issues?

If you are having connectivity issues with your Sonos speaker, there are a few things you can try to troubleshoot the problem:

Check the power to your Sonos speaker. Make sure the power cord is securely plugged into both the Sonos speaker and the power outlet.

Check your Sonos speaker’s status light. The status light on the front of your Sonos speaker should be solid white when it is powered on and connected to your Wi-Fi network. If the status light is blinking orange, it means that your speaker is not connected to your Wi-Fi network.
Check your Wi-Fi connection. Make sure that your router is turned on and that your Wi-Fi network is working properly. You can try restarting your router to see if that fixes the problem.
Try moving your Sonos speaker closer to your router. If your Sonos speaker is too far away from your router, it may have trouble connecting to your Wi-Fi network.

Try connecting your Sonos speaker to a different Wi-Fi network. If you are still having trouble connecting your Sonos speaker to your Wi-Fi network, try connecting it to a different Wi-Fi network, such as a guest network.

If you have tried all of the above troubleshooting steps and you are still having connectivity issues with your Sonos speaker, you may need to reset your speaker to its factory default settings.

To reset a Sonos speaker to its factory default settings, follow these steps:

Unplug the speaker’s power cord.
Press and hold the Connect button on the back of the speaker. The Connect button is the button with the two arrows pointing towards each other.
While holding the Connect button, plug the speaker’s power cord back in. Continue holding the Connect button until the status light on the front of the speaker starts flashing orange and white.

Release the Connect button. The status light will flash green when the reset process is complete.

Once the reset process is complete, your Sonos speaker will be ready to be set up again.

Conclusion

Learning how to reset Sonos speaker is a straightforward process. Whether you have an older model or a more recent one integrated with the Sonos S2 app, the general steps involve unplugging the speaker, utilizing the factory reset button if available, or performing the reset through the Sonos app for newer models.

Keep in mind that resetting your Sonos speaker will erase all settings, so it’s essential to be prepared to set it up again, including connecting it to your Wi-Fi network. By following these instructions and referring to your specific model’s manual, you can troubleshoot issues or prepare your speaker for a fresh start.